 |
ZYX R-50 Bloom Features
$1,000.
“Real Stereo” generator system
Pure damper material, long-life rubber with no powder filler
Air-response damper mechanism
6-nines pure copper wiring in coils
Eddy current-free cartridge body
Black-finished cantilever of light and rigid AIMg-5 aluminum alloy
Line-contact stylus
ZYX R-50 Bloom Technical Data
Type: moving-coil (dynamic)
Output voltage at 3.54cm/sec., 1kHz: 0.24mV
Frequency response 10Hz-40kHz
Channel separation: > 25dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 1.8g
Tracking force range 1.5-2g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/1.8g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: ALMg-5 tube, 0.38/0.3mm diameter
Stylus: solid line-contact diamond
Output terminals: 1.25mm diameter, gold-plated
Weight: 4.2g
|
|
|
ZYX R-100 Yatra MKII Features
$2,000.
“Real Stereo” generator system
Pure damper material, long-life rubber with no powder filler
Air-response damper mechanism
6-nines pure copper wiring in coils
Eddy current-free cartridge body
Boron cantilever
Micro-ridge stylus, long life span and wide frequency range
ZYX R-100 Yatra MKII Technical Data
Type: moving-coil (dynamic)
Output voltage at 3.54cm/sec., 1kHz: 0.24mV
Frequency response 10Hz-80kHz
Channel separation: > 30dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 2g
Tracking force range 1.7-2.5g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/2g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: 0.3mm dia.
Stylus: micro-ridge, .07mm sq
Output terminals: 1.25mm dia., gold-plated
Weight: 5g |
|
|
ZYX R-100 FS Fuji Features
$2,500.
“Real Stereo” generator system
Pure damper material, long-life rubber with no powder filler
Air-response damper mechanism
5-nines pure silver wiring in coils
Eddy current-free cartridge body, no metal powder filler
Boron cantilever
Micro-ridge stylus, long life span and wide frequency range
ZYX R-100 FS Fuji Technical Data
Type: moving-coil (dynamic)
Output voltage at 3.54cm/sec., 1kHz: 0.24mV
Frequency response 10Hz-80kHz
Channel separation: > 30dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 2g
Tracking force range 1.7-2.5g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/2g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: 0.3mm dia.
Stylus: micro-ridge, .07mm sq
Output terminals: 1.25mm dia., gold-plated
Weight: 5g |
|
|
ZYX R-1000 Airy 3-X Features
$3,450.
“Real Stereo” generator system
Cryogenically treated magnetic circuit
6-nines pure crystal copper wiring in coils, cryogenically treated
Boron cantilever
Micro-ridge stylus, long life span and wide frequency range
ZYX R-1000 Airy 3-X Technical Data
Type: moving-coil (dynamic), "Real Stereo" generator system
Output voltage at 5.0cm/sec., 1kHz: 0.34mV
Frequency response 10Hz-100kHz
Channel separation: > 30dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 2g
Tracking force range 1.7-2.5g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/2g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: 0.3mm dia.
Stylus: micro-ridge, .07mm sq
Output terminals: 1.25mm dia., gold-plated
Weight: 5g |
|
|
ZYX 4D-X Features
$4,580.
“Real Stereo” generator system
Cryogenically treated magnetic circuit
6-nines pure crystal copper wiring in coils, cryogenically treated
Boron cantilever
Micro-ridge stylus, long life span and wide frequency range
ZYX 4D-X Technical Data
Type: moving-coil (dynamic)
Output voltage at 3.54cm/sec., 1kHz: 0.24mV
Frequency response 10Hz-100kHz
Channel separation: > 30dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 2g
Tracking force range 1.7-2.5g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/2g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: 0.3mm dia.
Stylus: micro-ridge, .07mm sq
Coils: 6-nines pure crystal copper
Output terminals: 1.25mm dia., gold-plated
Weight: 7.9g, includes silver base and ZN special nut
dagago review
|
|
 |
ZYX OMEGA-X
$6,500.
Omega Technical Data
Type: Moving Coil (Dynamic) "REAL STEREO GENERATOR SYSTEM"
Cryogenic Treatment: Temperature -196"C (-320'F)
Output Voltage: 0.24mv (o.48mv) (3.54cm/sec, 1kHz)
Frequency Response: 10 Hz - 100kHz
20Hz - 20 kHz
Channel Separation: >30dB (1kHz)
Channel Balance: < o.5dB (1kHz)
Tracking recommended: 2.0gm (20'C - 25'C)
Tracking Force Range: 1.7gm - 2.5gm
Trackability: >80 M/2.0gm
Compliance Horizontal: 15 x 10cm.dyne
Vertical: 12 x 10 cm/dyne
Internal Impedance: 4ohm
Load Impedance: 100 ohm
Coil Wire X type: 6N Crystal Copper 0.035mm/cryo
S type: 5N Silver 0.035mm/cryo
G type: 5N Gold 0.035mm/cryo
Cantilever Material: Boron Solid 0.30mm
Stylus: Micro-Ridge solid Diamond 0.07mm
Output Terminal: 1.25mm K18 Solid Gold
Terminal Board: Pure Sapphire Plate
Net Weight: 7.8gm
|
|
|
ZYX R-1000 Sigma-X Features
$11,950.
“Real Stereo” generator system
Cryogenically treated magnetic circuit
6-nines crystal copper wiring in coils, cryogenically treated
Solid diamond cantilever
Micro-ridge stylus, long life span and wide frequency range
ZYX R-1000 Sigma-X Technical Data
Type: moving-coil (dynamic)
Output voltage at 5.0cm/sec., 1kHz: 0.34mV
Frequency response 10Hz-100kHz
Channel separation: > 30dB (1kHz)
Channel balance: < 0.5dB (1kHz)
Recommended tracking force: 2g
Tracking force range 1.7-2.5g
Horizontal compliance: 15x10-6cm/dyne (vertical: 12x10-6cm/dyne)
Tractability: > 80um/2g
Internal impedance: 4 ohms
Recommended load impedance: > 100 ohms
Cantilever: 0.22mm sq
Stylus: micro-ridge, .07mm sq
Output terminals: 1.25mm dia., gold-plated
Weight: 5g |
|
 |
ZYX DIAMOND-X
$14,900.
Technical Data
Type: Moving Coil (Dynamic) "REAL STEREO GENERATOR SYSTEM"
Cryogenic Treatment: Temperature -196"C (-320'F)
Output Voltage: 0.24mv (o.48mv) (3.54cm/sec, 1kHz)
Frequency Response: 10 Hz - 100kHz
20Hz - 20 kHz
Channel Separation: >30dB (1kHz)
Channel Balance: < o.5dB (1kHz)
Tracking recommended: 2.0gm (20'C - 25'C)
Tracking Force Range: 1.7gm - 2.5gm
Trackability: >80 M/2.0gm
Compliance Horizontal: 15 x 10cm.dyne
Vertical: 12 x 10 cm/dyne
Internal Impedance: 4ohm
Load Impedance: 100 ohm
Coil Wire X type: 6N Crystal Copper 0.035mm/cryo
S type: 5N Silver 0.035mm/cryo
G type: 5N Gold 0.035mm/cryo
Cantilever Material: Natural Diamond 0.22mm
Stylus: Micro-Ridge solid Diamond 0.07mm
Output Terminal: 1.25mm K18 Solid Gold
Terminal Board: Pure Sapphire Plate
Net Weight: 7.8gm
|
|
 |
ZYX Artisan MM/MC Phono Preamp
$4,995.
ZYX Artisan Features
Resistors comprised of cryogenically purified crystal copper wiring and no-inductance coils
CR-type RIAA equalizer optimal for precise reproduction of time information and timbre
Noiseless power supply and rectifier circuits
MM/MC compatible
100% Playback Circuit
Wooden chassis that will not interfere with circuitry
ZYX Artisan Technical Data
Input impedance: 125 ohms/MC, 47K ohms/MM
Gain: 55dB/MC, 35dB/MM (1KHz)
SNR: >95dB
THD: <0.1% (1KHz)
Frequency response: 2Hz-500KHz+/-1dB (linear)
RIAA characteristics: +/-0.2dB (20Hz-20KHz)
Output impedance: 600 ohms
Channel balance: 0dB adjusted (1KHz)
Channel separation: >100dB (1KHz)
Inputs: 2 x RCA (MC, MM)
Output: 1 x RCA
Power consumption: 1.2W
Batteries: 9 x KR-1100AAu (1.2V/1100mAH)
AC adaptor: input 100-120V AC 50/60Hz 0.3A
Output: 12V DC 1A
Size: 154mmWx66mmHx192mmD
Weight: 1.49lbs |