DREAM 
Simply said, Dream speaker cable produces delicate highs, neutral and articulate mids and deep musical bass.  A worthy addition to any reference system.  We know of none better.

The outer layer of the Dream cable is made of 12 wire assemblies and 4 spacers.

Each wire assembly is 6.35 mm (1/4 inch) in diameter, made of 8 individually insulated solid core wires in our proprietary non-resonant distributed LITZ configuration. Two different thicknesses (gauges) of 99.999% pure solid core copper, and two different gauges of 99.997% pure solid core silver are used for each wire assembly. 

The wire assemblies are wrapped around a hollow, flexible para-vacuum center. (flexible Helium filled tubing).

Three wire assemblies being run side-by-side create wire bundles (triple runs). Therefore, there are four wire bundles (triple runs) in each Dream cable.

The four wire bundles are separated by four blue foam Teflon dividing runs (spacers).

The spacers have the same diameter as the wire assemblies, i.e. 6.35 mm (1/4 inch).

Using dividers dramatically reduces the overall cable capacitance and thus assures stability (non-oscillation) of any amplifier. In addition, these four equally distributed spacers-dividers allows internal bi-wiring with Dream cables without any performance loss.

The four triple runs (wire bundles) are being run individually for internal bi-wire. For single wire, two triple runs being run in parallel make a positive run, and the other two make a negative run. 

SAKRA

The worlds finest analog interconnect.

Design Features

• Amorphous conductive wire - which is perfectly homogeneous, grain-less, i.e. identical in all directions, since it has no crystal structure.
• Ultra thin wire: 0.001”
• Proprietary non-resonant cable geometry
• Individually insulated strands (to eliminate direct electrical contact, i.e. galvanic interaction between strands – otherwise the multiple bare strands behave like a single thicker wire)
• Non-inductive bifilar winding
• Electrical resonance control via STEALTH distributed LITZ geometry
• Mechanical resonance control: dielectric jackets with mechanical properties
• Characteristic impedance control
• Ultra low energy storage dielectric
• Proprietary STEALTH connectors custom and highly advanced; Carbon Fiber/Titanium shells.
• Advanced termination technique (high pressure crimping = cold weld) no intermediate agent (solder) involved.
  

INDRA
A long term reference interconnect of the highest quality only surpassed recently by the Sakra. Still a leader in the world of cable.

Design Features

• Amorphous conductive media (wire)
• Ultra thin wire
• Individually insulated strands
• Low energy storage dielectric
• Proprietary non-resonant cable geometry
• Mechanical resonance control
• Characteristic impedance control
• Proprietary STEALTH RCA and XLR connectors
• Advanced termination technique
  

DREAM POWER CORDS
Dream power cords will give improvements to your sound as you integrate one at a time. However, to get the full benefit of the virtual "star grounding effect" all cords in your system should be replaced with Dream P/C's. Star grounding is widely known as the most effective way to eliminate ground loops and reduce noise and hum.

All Dream cords are made of multiple bundles of silver-plated oxygen-free copper within Teflon insulation, in our proprietary "distributed LITZ" configuration which puts the least stress on the wires and provides the least possible electrical and electromagnetic interaction between the wires than any other configuration or geometry known to us. Each wire bundle is enclosed in a separate hermetically sealed STEALTH para-vacuum tube (equivalent to 15-fold vacuum). The combination of para-vacuum and distributed LITZ reduces all forms of interaction between the wire bundles even further, and due to an extremely low effective dielectric constant, assures very low energy storage, perceived as improved clarity and very fast coherent sound.

The four types of Dream Cords

The four types of Dream cords are similar, but not the same. They have the same AC carrying multi path (multiple groups of wires, STEALTH proprietary configuration), but the ground layout and ground filtering is type-specific, and thus each Dream AC cord has its type printed on its carbon shell. All four types are individually color-coded to avoid confusion.
Dream Preamp (black with blue stripes) - for preamplifiers
Dream Digital (black with gold stripes) - for digital gear (CD players and transports, digital processors and AD and DA converters, digital and class-D power amplifiers)
Dream Power (black with FIVE silver stripes) - for analog power amplifiers, turntable motors
Dream Wall (black with TWO silver stripes) - for AC power conditioners and AC power strips